End of life / Linux Kernel / 5.15
Linux Kernel 5.15 end of life
Linux Kernel 5.15 reaches end of life on 31 December 2026, in 116 days. 1478 known CVEs reach this release, the most severe rated CRITICAL.
The detail
- Released
- 31 October 2021
- End of life
- 31 December 2026
- Countdown
- in 116 days
- Status
- Supported
- Long term support
- Yes
- Newest build on this release
- 5.15.220
- Newest release overall
- 7.2.3
CVEs that reach 5.15
| Advisory | Severity | CVSS | Published | Fixed in |
|---|---|---|---|---|
| CVE-2026-23112 In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec
nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU
length or offset exceeds sg_cnt and then use bogus sg->length/offset
values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining
entries, and sg->length/offset before building the bvec. | CRITICAL | 9.8 | 13 February 2026 | 5.15.200 |
| CVE-2023-38429 An issue was discovered in the Linux kernel before 6.3.4. fs/ksmbd/connection.c in ksmbd has an off-by-one error in memory allocation (because of ksmbd_smb2_check_message) that may lead to out-of-bounds access. | CRITICAL | 9.8 | 18 July 2023 | 5.15.113 |
| CVE-2023-38427 An issue was discovered in the Linux kernel before 6.3.8. fs/smb/server/smb2pdu.c in ksmbd has an integer underflow and out-of-bounds read in deassemble_neg_contexts. | CRITICAL | 9.8 | 18 July 2023 | 5.15.145 |
| CVE-2022-47939 An issue was discovered in ksmbd in the Linux kernel 5.15 through 5.19 before 5.19.2. fs/ksmbd/smb2pdu.c has a use-after-free and OOPS for SMB2_TREE_DISCONNECT. | CRITICAL | 9.8 | 23 December 2022 | 5.15.61 |
| CVE-2021-3773 A flaw in netfilter could allow a network-connected attacker to infer openvpn connection endpoint information for further use in traditional network attacks. | CRITICAL | 9.8 | 16 February 2022 | 5.15.15 |
| CVE-2024-47685 In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending
garbage on the four reserved tcp bits (th->res1)
Use skb_put_zero() to clear the whole TCP header,
as done in nf_reject_ip_tcphdr_put()
BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255
nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf | CRITICAL | 9.1 | 21 October 2024 | 5.15.168 |
| CVE-2023-38432 An issue was discovered in the Linux kernel before 6.3.10. fs/smb/server/smb2misc.c in ksmbd does not validate the relationship between the command payload size and the RFC1002 length specification, leading to an out-of-bounds read. | CRITICAL | 9.1 | 18 July 2023 | 5.15.121 |
| CVE-2023-38431 An issue was discovered in the Linux kernel before 6.3.8. fs/smb/server/connection.c in ksmbd does not validate the relationship between the NetBIOS header's length field and the SMB header sizes, via pdu_size in ksmbd_conn_handler_loop, leading to an out-of-bounds read. | CRITICAL | 9.1 | 18 July 2023 | 5.15.145 |
| CVE-2023-38430 An issue was discovered in the Linux kernel before 6.3.9. ksmbd does not validate the SMB request protocol ID, leading to an out-of-bounds read. | CRITICAL | 9.1 | 18 July 2023 | 5.15.145 |
| CVE-2023-38428 An issue was discovered in the Linux kernel before 6.3.4. fs/ksmbd/smb2pdu.c in ksmbd does not properly check the UserName value because it does not consider the address of security buffer, leading to an out-of-bounds read. | CRITICAL | 9.1 | 18 July 2023 | 5.15.113 |
| CVE-2023-38426 An issue was discovered in the Linux kernel before 6.3.4. ksmbd has an out-of-bounds read in smb2_find_context_vals when create_context's name_len is larger than the tag length. | CRITICAL | 9.1 | 18 July 2023 | 5.15.113 |
| CVE-2026-23395 In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Wi | HIGH | 8.8 | 25 March 2026 | 5.15.203 |
| CVE-2024-47659 In the Linux kernel, the following vulnerability has been resolved:
smack: tcp: ipv4, fix incorrect labeling
Currently, Smack mirrors the label of incoming tcp/ipv4 connections:
when a label 'foo' connects to a label 'bar' with tcp/ipv4,
'foo' always gets 'foo' in returned ipv4 packets. So,
1) returned packets are incorrectly labeled ('foo' instead of 'bar')
2) 'bar' can write to 'foo' without being authorized to write.
Here is a scenario how to see this:
* Take two machines, let's call them | HIGH | 8.8 | 9 October 2024 | 5.15.167 |
| CVE-2022-2196 A regression exists in the Linux Kernel within KVM: nVMX that allowed for speculative execution attacks. L2 can carry out Spectre v2 attacks on L1 due to L1 thinking it doesn't need retpolines or IBPB after running L2 due to KVM (L0) advertising eIBRS support to L1. An attacker at L2 with code execution can execute code on an indirect branch on the host machine. We recommend upgrading to Kernel 6.2 or applying the relevant stable backports (v5.4.233, v5.10.170, v5.15.96, v6.1.14). | HIGH | 8.8 | 9 January 2023 | 5.15.96 |
| CVE-2026-31788 In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: restrict usage in unprivileged domU
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus b | HIGH | 8.2 | 25 March 2026 | 5.15.203 |
| CVE-2023-2008 A flaw was found in the Linux kernel's udmabuf device driver, within a fault handler. This issue occurs due to the lack of proper validation of user-supplied data, which can result in memory access past the end of an array. This may allow an attacker to escalate privileges and execute arbitrary code in the context of the kernel. | HIGH | 8.2 | 14 April 2023 | 5.19 |
| CVE-2024-58087 In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix racy issue from session lookup and expire
Increment the session reference count within the lock for lookup to avoid
racy issue with session expire. | HIGH | 8.1 | 12 March 2025 | 5.15.176 |
| CVE-2022-50386 In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix user-after-free
This uses l2cap_chan_hold_unless_zero() after calling
__l2cap_get_chan_blah() to prevent the following trace:
Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref
*kref)
Bluetooth: chan 0000000023c4974d
Bluetooth: parent 00000000ae861c08
==================================================================
BUG: KASAN: use-after-free in __mutex_waiter_is_first
kernel/locking/mut | HIGH | 8.0 | 18 September 2025 | 5.15.75 |
| CVE-2023-52434 In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOBs in smb2_parse_contexts()
Validate offsets and lengths before dereferencing create contexts in
smb2_parse_contexts().
This fixes following oops when accessing invalid create contexts from
server:
BUG: unable to handle page fault for address: ffff8881178d8cc3
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 4a01067 P4D 4a01067 PUD 0
Oops: 0000 [ | HIGH | 8.0 | 20 February 2024 | 5.15.150 |
| CVE-2022-3534 A vulnerability has been found in Linux Kernel up to 5.10.162/5.15.85/6.0.15/6.1.1. The impacted element is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. Upgrading to version 5.10.163, 5.15.86, 6.0.16, 6.1.2 and 6.2 is sufficient to resolve this issue. The identifier of the patch is c61650b869e0b6fb0c0a28ed42d928eea969afc8/fbe08093fb2334549859829ef81d42570812597d/8c64a8e76eb85d422af5ec60ccbf26e3ead8c333/a73 | HIGH | 8.0 | 17 October 2022 | 5.15.86 |
| CVE-2026-64446 In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()
supplicant_ie is a 256-byte array in struct security_priv. The WPA and
WPA2 IE copy paths use:
memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2);
where wpa_ielen is the raw IE length field (u8, 0-255). When a local user
supplies a connect request via nl80211 with a crafted WPA IE of length 255,
wpa_ielen + 2 equals 257, overflow | HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64424 In the Linux kernel, the following vulnerability has been resolved:
netpoll: fix a use-after-free on shutdown path
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_t | HIGH | 7.8 | 25 July 2026 | 6.12.96 |
| CVE-2026-64363 In the Linux kernel, the following vulnerability has been resolved:
HID: appleir: fix UAF on pending key_up_timer in remove()
appleir_remove() runs hid_hw_stop() before timer_delete_sync().
hid_hw_stop() synchronously unregisters the HID input device via
hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),
which drops the last reference and frees the underlying input_dev when
no userspace handle holds it open.
key_up_tick() reads appleir->input_dev and calls input_report_ke | HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64362 In the Linux kernel, the following vulnerability has been resolved:
HID: lg-g15: cancel pending work on remove to fix a use-after-free
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.
The driver had no remove callback and never cancelled the wor | HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64352 In the Linux kernel, the following vulnerability has been resolved:
bpf: Allow LPM map access from sleepable BPF programs
trie_lookup_elem() annotates its rcu_dereference_check() walks with
only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c)
resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and
classic RCU readers but fails for sleepable BPF programs, which enter
via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace().
trie_update_elem() and trie_de | HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64348 In the Linux kernel, the following vulnerability has been resolved:
usb: free iso schedules on failed submit
EHCI and FOTG210 isochronous submits build an ehci_iso_sched before
linking the URB to the endpoint queue, and keep the staged schedule in
urb->hcpriv until iso_stream_schedule() and the link helpers consume it.
If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()
fails, submit jumps to done_not_linked before that handoff happens and
leaks the staged schedule still att | HIGH | 7.8 | 25 July 2026 | 6.6.145 |
| CVE-2026-64344 In the Linux kernel, the following vulnerability has been resolved:
USB: idmouse: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
| HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64343 In the Linux kernel, the following vulnerability has been resolved:
USB: ldusb: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
| HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64342 In the Linux kernel, the following vulnerability has been resolved:
USB: iowarrior: fix use-after-free on disconnect
Submitted write URBs are not stopped on close() and therefore need to be
stopped unconditionally on disconnect() to avoid use-after-free in the
completion handler. | HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64341 In the Linux kernel, the following vulnerability has been resolved:
USB: iowarrior: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atom | HIGH | 7.8 | 25 July 2026 | 6.12.97 |
| CVE-2026-64340 In the Linux kernel, the following vulnerability has been resolved:
USB: legousbtower: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
| HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64330 In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: Validate SVID index in svdm_consume_modes()
In svdm_consume_modes(), the SVID value is read from pmdata->svids using
pmdata->svid_index as an array index without bounds validation:
paltmode->svid = pmdata->svids[pmdata->svid_index];
If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results
in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data
is embedded inside struc | HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64329 In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove
The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(),
which on a connector-change event calls ucsi_connector_change() and
schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees
uc->ucsi (kfree) before free_irq() is called, so a handler invocation
already in flight may access the freed object after ucsi_destroy().
CPU 0 (remove) | HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64305 In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - protect service table iterations with service_lock
The service_table list is protected by service_lock when entries are
added or removed (in adf_service_add() and adf_service_remove()), but
several functions iterate over the list without holding this lock.
A concurrent adf_service_register() or adf_service_unregister() call
could modify the list during traversal, leading to list corruption or
a use-after-free.
| HIGH | 7.8 | 25 July 2026 | 6.12.96 |
| CVE-2026-64274 In the Linux kernel, the following vulnerability has been resolved:
Input: goodix - clamp the device-reported contact count
goodix_ts_read_input_report() copies the number of touch points reported
by the device into an on-stack buffer
u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only
runtime check bounds the per-interrupt count against ts->max_touch_num,
but that value is taken verbatim from a 4-bit field | HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64273 In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - bound the device-reported force-feedback effect index
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CO | HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64272 In the Linux kernel, the following vulnerability has been resolved:
Input: mms114 - fix touch indexing for MMS134S and MMS136
The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms11 | HIGH | 7.8 | 25 July 2026 | 6.6.145 |
| CVE-2026-64271 In the Linux kernel, the following vulnerability has been resolved:
Input: touchwin - reset the packet index on every complete packet
tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:
tw->data[tw->idx++] = data;
if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
...
tw->idx = 0;
}
The reset is gated on tw->data[1] == tw->data[2], a | HIGH | 7.8 | 25 July 2026 | 5.15.212 |
| CVE-2026-64270 In the Linux kernel, the following vulnerability has been resolved:
Input: mms114 - reject an oversized device packet size
mms114_interrupt() reads a packet of touch data from the device into a
fixed-size on-stack buffer
struct mms114_touch touch[MMS114_MAX_TOUCH];
which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes,
i.e. 80 bytes. The length of the I2C read into it is taken verbatim from
the device:
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
if (packet_ | HIGH | 7.8 | 25 July 2026 | 6.6.145 |
| CVE-2026-64249 In the Linux kernel, the following vulnerability has been resolved:
fpga: region: fix use-after-free in child_regions_with_firmware()
Move of_node_put(child_region) after the error print to avoid accessing
freed memory when pr_err() references child_region.
[ Yilun: Fix the Fixes tag ] | HIGH | 7.8 | 24 July 2026 | 5.15.211 |
| CVE-2026-64246 In the Linux kernel, the following vulnerability has been resolved:
power: reset: linkstation-poweroff: fix use-after-free in the linkstation_poweroff_init()
Move of_node_put(dn) after the of_match_node() call, which still needs
the node pointer. The node reference is correctly released after use. | HIGH | 7.8 | 24 July 2026 | 5.15.211 |
| CVE-2026-64242 In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: net2280: Fix double free in probe error path
usb_initialize_gadget() installs gadget_release() as the release
callback for the embedded gadget device. The struct net2280 instance is
therefore released through gadget_release() when the gadget device's last
reference is dropped.
The probe error path calls net2280_remove(), which tears down the
partially initialized device and drops the gadget reference with
usb_pu | HIGH | 7.8 | 24 July 2026 | 5.15.210 |
| CVE-2026-64225 In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: CGX: add bounds check to cgx_speed_mbps index
cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values
0-15. If it returns a value >= 13, this causes an out-of-bounds array
access. Add a bounds check and default to speed 0 if the index is out of
range. | HIGH | 7.8 | 24 July 2026 | 5.15.210 |
| CVE-2026-64103 In the Linux kernel, the following vulnerability has been resolved:
scsi: isci: Fix use-after-free in device removal path
The ISCI completion tasklet is initialized in isci_host_alloc()
(drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy
interrupt handlers (drivers/scsi/isci/host.c:223,613).
isci_host_deinit() stops the controller and waits for stop completion,
but it never kills completion_tasklet before teardown continues. A
top-of-function tasklet_kill() is not sufficie | HIGH | 7.8 | 19 July 2026 | 5.15.209 |
| CVE-2026-64085 In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer
adm1266_pmbus_block_xfer() copies the device-supplied block payload
into the caller-provided buffer using the device-supplied length:
memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
The helper does not know how large data_r is and trusts the device to
return at most one record's worth of bytes. adm1266_nvmem_read_blackbox()
violates that contra | HIGH | 7.8 | 19 July 2026 | 5.15.209 |
| CVE-2026-63794 In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT path
In sev_dbg_crypt(), the per-iteration transfer length is bounded by
the source page offset (PAGE_SIZE - s_off) but not by the destination
page offset (PAGE_SIZE - d_off). When d_off > s_off, the encrypt
path (__sev_dbg_encrypt_user) performs a read-modify-write using a
single-page intermediate buffer (dst_tpage):
1. __sev_dbg_decrypt() expands the size to roun | HIGH | 7.8 | 19 July 2026 | 5.15.211 |
| CVE-2026-53296 In the Linux kernel, the following vulnerability has been resolved:
mailbox: mailbox-test: free channels on probe error
On probe error, free the previously obtained channels. This not only
prevents a leak, but also UAF scenarios because the client structure
will be removed nonetheless because it was allocated with devm. | HIGH | 7.8 | 26 June 2026 | 5.15.209 |
| CVE-2026-53294 In the Linux kernel, the following vulnerability has been resolved:
mailbox: mailbox-test: don't free the reused channel
The RX channel can be aliased to the TX channel if it has a different
MMIO. This special case needs to be handled when freeing the channels
otherwise a double-free occurs. | HIGH | 7.8 | 26 June 2026 | 5.15.209 |
| CVE-2026-53195 In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() valida | HIGH | 7.8 | 25 June 2026 | 5.15.210 |
| CVE-2026-53157 In the Linux kernel, the following vulnerability has been resolved:
net: phonet: free phonet_device after RCU grace period
phonet_device_destroy() removes a phonet_device from the per-net device
list with list_del_rcu(), but frees it immediately. RCU readers walking
the same list can still hold a pointer to the object after it has been
removed, leading to a slab-use-after-free.
Use kfree_rcu(), matching the lifetime rule already used by
phonet_address_del() for the same object type. | HIGH | 7.8 | 25 June 2026 | 5.15.211 |
Showing the 50 most severe of 1478 advisories that reach 5.15. A release matched by this many advisories is matched by every fix published on its own line, so the count is a reason to take the newest build rather than a list to work through.
A further 397 advisories publish no version range, so whether they reach 5.15 cannot be determined from the advisory alone.
Where to move next
The newest tracked release is 7.2.3. If moving release is not an option yet, 5.15.220 is the newest build on the 5.15 line and needs no migration.
Other Linux Kernel releases
Vendor sources last checked 6 September 2026, and checked daily. This data last changed on 6 September 2026.
You just looked this up by hand, for one version
StackDrift scans your machines, works out every version you actually run, and mails you before the next support window closes or a CVE lands on a build you have deployed. It covers the runtimes, operating systems and kernels underneath your code, not just your packages.